Flash Nokia s60v5(5233) to Install LinsPirat (belle os)

Flash Nokia s60v5(5233) to Install LinsPirat (belle os)

Friends here new trick........

Before Starting, Download and install (if this or latest framework is already installed in your computer, no need to download this file) .NET Framework 2.0

Installation Files
For Nokia 5233 RM-625 -


Nokia 5233 RM625 - Download (77.44 MB)
http://www.mediafire.com/?7ktkyh05sgz102m
RM-625 V51.1.002 New Core by Binh24 - Download (35.2 MB)
http://www.4shared.com/get/k0zTFhuE/RM-6...y_Bin.html

Download Flashing Tools:

Download - Jaf Imulator (Contains jaf setup.exe , Pkey Emulator)
Install jaf setup.exe.
http://www.ziddu.com/download/13150767/J...s.zip.html

Click to start download - Jaf_nok4models.rar (21 KB Only)
http://www.mediafire.com/?407sg45s7sr05q7
Extract file and copy jaf_nok4models.ini to folder C:\Program Files\ODEON\JAF (Replace original file)

You have to install Nokia PC Suite. If you dont have Download from Here.
http://europe.nokia.com/support/download.../pc-suites

Flashing with JAF.1. Create directory C:\Program Files\Nokia\Pheonix\Products\RM-625
2. Extract file LinsPirat LTS Rev2.1 RM625 with Plus!.7z
3. Copy RM625_51.1.002_000_001_U001.uda.fpsx and RM-625_51.1.002_prd.rofs2.V21 and paste into C:\Program Files\Nokia\Pheonix\Products\RM-625
4. Extract RM-625 V51.1.002 New Core by Binh24.7z
5. Copy this files -

RM-625_51.1.002_prd.core.C00
RM625_0597963_51.1.002_001.dcp
RM625_0597963_51.1.002_001.vpl
RM625_0597963_51.1.002_001_signature.bin

Paste these files in folder C:\Program Files\Nokia\Pheonix\Products\RM-625. Don't copy remaining two files.
6.Rename file RM-625_51.1.002_prd.core.C00 to RM-625_51.1.002_prd.core.C0r
(extension of the file is C0r and NOT COr)(It is 0 not O)
6. Now, copy all the files in folder C:\Program Files\Nokia\Pheonix\Products\RM-625 and paste them on Desktop (Create new folder on desktop and paste them into it)

7. Connect your phone with PC Suite Mode.
8. Now go to the folder where you extracted JAF EMULATOR. Open jaf pkey emulator.exe in Compatibility Mode. (To open this file in compatibility mode, right click on it, click on compatibility tab, and select Windows xp service pack 3 OR Windows xp service pack 2)


9. Now click GO. (Dont make any changes.)


10. Then you will see Error: BOX DRIVER NOT INSTALLED.... click OK (don't panic)








11. Now click on BB5 tab and untick CRT 308 and tick following:-
*Manual Flash
*Dead USB
*Use INI (when you click USE INI, a dialog box will apear. just select NOKIA 5233 and click OK)




12. Follow these steps:

Click MCU and select the RM-625_51.1.002_prd.core.C0r file (the renamed core file)
Click PPM and select file RM-625_51.1.002_prd.rofs2.V21
Click APE Variant and select file RM625_51.1.002_000_001_U001.uda.fpsx
IGNOR CNT





13. Hard Reset your mobile.




14. Now TURN OFF your phone !!! Then click FLASH button. After that press and hold POWER button (button on mobile to switch it on/off) for 1 seconds (don't hold more then 1 second! you are NOT switching on your mobile) and JAF now will start flashing.




If JAF dont detect your phone then try again and again until it is detected .


15. JAF will complete installation within 5 minutes. After completing flashing your phone will restart.


Final Screen After Installation Completes.
Note -

You cant downgrade from new version to old. It will break your phone.
If your phone breaked (dead) while flashing then flash again.